INSTALLATION GUIDE
A. General
WaterComm is a 4-port leak detection and leak notification system that can be installed to act as a
centrally located control panel with leak detection zones wired away from it, or as individual units
installed in risk areas with leak detection tape connected.
Every port that is used is programmed with a location tag so that if a leak is detected the email or SMS
notification gives precise date, time, and location information.
IMPORTANT NOTE:
Prior to installation, please ensure that Leaksafe is provided with a mobile phone
number where equipment test SMS’s will be sent during installation. This can be amended following
installation so that future alarms are sent to whoever will be managing the system. Contact Leaksafe
on
0344 848 0488
or
to provide this information.
LEAK
SAFE
SOLUTIONS | WATERCOMM INSTALLATION GUIDE
PAGE 2
B. Components
1.5M
Connecting
cable
Leak
detection
tape
WaterComm
device
Zone LED’s
