Leaf LTHDMI88 / LTHDMI88E manual
Page 6
Of 16
The Ethernet connection is 100Base-T full duplex. An external Ethernet router / switch
may be added for added flexibility and performance.
2.3 Front Panel LED display and selection buttons
16 dual colour (green / blue) Light Emitting Diodes(LEDs) and 2 press button switches
are fitted at the right hand end of the front panel.
The top row of LEDs is associated with the 8 inputs (sources) with one LED for each
input, 1 to 8, left to right.
The lower row of LEDs is associated with the 8 outputs (zones) with one LED for each
output, 1 to 8, left to right.
The LEDS may be off or on in one of 3 different colours corresponding to different
operation modes.
2.3.1.1
GREEN LEDS:
DISPLAY MODE.
When the LEDs are green the top row of LEDs indicate the inputs (sources) that are
connected to an output (zone).
The lower row of LEDs indicate the outputs (zone) that are connected to an input
(source).
2.3.1.2
BLUE LEDS:
SELECTION MODE.
After a button is pressed the display is in selection mode for a period of time.
CONSTANT: A constant BLUE led indicates a selected input or output.
FLASHING: A flashing BLUE led indicates a pending change.
2.3.1.3
CYAN LEDS:
ZONE LOCK MODE.
Constant Cyan LEDs indicate locked mode where an output (zone) has been
exclusively locked to a specific input (source). For further information on Zone Lock
mode, refer to the Features section.
Top button
(A)
Lower button
(B)
Summary of Contents for LTHDMI88
Page 1: ...LTHDMI88 LTHDMI88E ...
