Leaf LT2020E manual
Page 4
Of 18
1 Introducing the Leaf True LT2020E Matrix
system
1.1 Overview
The Leaf True HDMI Matrix System comprises a Leaf
LT2020E
interface unit and Leaf
LTB1E
breakouts. The Leaf True HDMI Matrix system is designed to accept HDMI A/V
sources at its 20 inputs and route them to up to 16 remotely located breakouts and up
to 4 local HDMI outputs. In this document, each input signal source is termed a
source
and each output and breakout is called a
zone.
Additional features include Ethernet through feed capability, infrared (IR) control
through feed and RS232 through feed capability between the interface and breakouts.
Note that these are through feeds only and have no direct control function of the Leaf
True system.
Interconnection between a Leaf True interface and associated Leaf True breakouts is
via one single cat5e/6/6a four pair cable for each breakout. Single cat5e /6 /6a cable
interconnect between these components is made possible through the use of HDBaseT
technology. This technology enables Video and Audio, as well as Ethernet, IR, and
RS232 through feed to be all sent by a single cable per zone over large distances.
Cabling specifications and information can be found in supplementary documentation.
The Leaf True system is designed to be controlled via RS232 commands from 3
rd
party
control systems. Control of basic switching functions can be (also or instead) achieved
via a proprietary Leaf controller such as the Leaf TC3 connected by 6 wire Telco cable
and RJ12 (6P6C) modular connectors.
Manual control of the basic switching functions can be also be achieved by the use of
a front panel mounted touch screen on the LT2020E.
The LT2020E is built into a 3RU rack-mountable metal housing and is provided with
rubber feet should table / desktop mounting be preferred.
Leaf True LTB1E
Leaf True LT2020E
Summary of Contents for LT2020E
Page 1: ...LT2020E...
