Leaf LT2020E manual
Page 18 Of 18
LTHDMI2020E
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC
rules.
LTB1E: BREAKOUT
FEATURE
SPECIFICATION
1
INPUTS: MAIN A/V
(1x) HDBase-T Input
. See LT2020E for further
specification.
2
OUTPUTS: AUDIO/VIDEO
(1x) HDMI output
3
INPUT: AUDIO
(1X) Digital coax (S/PDIF) via RCA socket
Audio return from RCA socket specification:
Range: ~50 metres. Less if subjected to electrical
interference, cable type, power supplies used etc.
4
OUTPUTS: ETHERNET
(1x) ETHERNET OUTPUT
5
OUTPUTS:RS232
(1x) RS-232 PORT (BLACK RJ45 CONNECTOR) Up to 115200
Baud.
6
OUTPUT: IR THROUGHPUT
IR LED DRIVER 38KHz... OR... IR INPUT. (Selected by main
unit). 3.5mm TRS female connector
7
NUMBER OF INPUTS/OUTPUT
1/1
8
POWER
Local power required 12W (1A @ 12V).
9
DIMENSIONS (W,D,H)
116mmx121mmx31mm(36mm with wall plate fitted)
Summary of Contents for LT2020E
Page 1: ...LT2020E...
