Leadtek Research Inc.
12
3-2 Memory Installation
1.
The mainboard provides three 168-Pin DIMM (Double In-Line Memory Module)
sockets. It supports a maximum of 1.5 GB memory. You can use SDRAM from 8MB,
16MB, 32MB, 64MB, 128MB, 256MB to 512MB per DIMM.
2.
IF you use 100Mhz CPU Bus/SDRAM bus synchronous frequency , you must use the
qualify SDRAM which meets PC-100 Specifications.
The procedures:
1.
Checking: The DIMM slot has two keys marked ”VOLT and DRAM” Thus, the
DIMM memory module can only fit in one direction.
2.
Insert the DIMM memory module vertically into the DIMM socket then push it in.
3.
The Plastic clip at the side of the DIMM socket will automatically close.
Note
:
Use only
3.3V unbuffered DIMM
