7. VIDEO SIGNAL WAVEFORM DISPLAY
40
F•3
F•3
7.6.1
Selecting a Line
When the video signal waveform is displayed using line display, follow the procedure below
to select the line number.
• Procedure
→
LINE SELECT
→
LINE SELECT:OFF / ON
After following the procedure above and selecting ON, turn the function dial
(F•D) to
select a line number.
Figure 7-16 Line number selection
7.6.2
Setting the Line Select Field
Follow the procedure below to set the line selection range. This menu does not appear
when the input signal is progressive. You can set the line selection range to:
FIELD1: The line selection range is limited to the fundamental signal of field 1.
FIELD2: The line selection range is limited to the fundamental signal of field 2.
FRAME: The line selection range is not limited.
• Procedure
→
LINE SELECT
→
FIELD:FIELD1 / FIELD2 / FRAME
F•1
F•2
WFM
WFM
USO
RESTRITO
