19
6. LV 58SER04 SYSTEM SETUP
Quick PID selection does not allow you to switch between multiple PIDs listed in the
same PMT. To select from among multiple PIDs listed in the same PMT, see section
6.1.2,
“Manual PID Selection.”
You cannot use the A and B keys while in the system menu.
6.1.2
Manual PID Selection
To select the PIDs of the MPEG-2 TS audio and video streams to be decoded, specify the
program to be decoded by selecting a PMT PID from the PAT. Then, select the PIDs of the
audio and video streams to be decoded from the PMT.
The information listed in the PAT appears in a data tree in the PID selection display.
Turn the function dial
(F•D) to move the cursor to the PID of the desired PMT on the tree.
Then, press F•2 PMT PID to select the PID of the PMT to be decoded. All of the PID listed
in the PMT branch out below it. VIDEO and AUDIO appear next to decodable streams.
The PIDs for the audio and video streams that the LV 58SER04 decodes must be listed in
the same PMT. You cannot set separate PMTs for audio and video.
• Procedure
SYS
→ F•1 UNIT SETUP → F•1 to F•4 SETUP (select the unit number that corresponds
to the slot that the LV 58SER04 is installed in)
→ F•2 PMT PID
6.1.3
Selecting a Video PID
To select the PID of the video stream that you want to decode, perform the procedure
described in section 6.1.1,
“Semiautomatic PID Selection,” or in section 6.1.2, “Manual PID
Selection,” and then select a PID for a decodable video stream from among the PIDs listed
in the PMT. The PID for the video data that you select will be displayed in green.
When you select a PID for a PMT in the PID selection display, the PID listed in the PMT
appear. Turn
the function dial (F•D) to move the cursor to a PID for decodable video data.
VIDEO is displayed to the right of PIDs for decodable video data. Press F•3 VIDEO PID
SEL to select the PID of the video data to be decoded. You cannot select PIDs that do not
have VIDEO displayed to their right, even if you move the cursor to them and press
F•3
VIDEO PID SEL.
• Procedure
SYS
→ F•1 UNIT SETUP → F•1 to F•4 SETUP (select the unit number that corresponds
to the slot that the LV 58SER04 is installed in)
→ F•3 VIDEO PID SEL
USO
RESTRITO
