28
7. VIDEO SIGNAL WAVEFORM DISPLAY
● V POS Knob
Use to vertically adjust the video signal
waveform’s position.
You can push the knob to return the video signal waveform to its default vertical position.
● H POS Knob
Use to horizontally adjust the video signal
waveform’s position.
You can push the knob to return the video signal waveform to its default horizontal
position.
7.2
Setting the Waveform Display Mode
To switch between the overlay and parade displays, press the OVLAY key on the front panel.
The overlay display shows the waveforms in the selected display area on top of each other.
The parade display shows the waveforms in the selected display area side by side. The
OVLAY key is lighted when the overlay display is selected, and it is not lighted when the
parade display is selected.
Figure 7-3 OVLAY key
● Overlay Display
In the overlay display, the waveforms selected according to the procedure described in
section 7.3,
“Selecting Waveform Display Channels,” are displayed on top of each other.
Figure 7-4 Overlay Display
USO
RESTRITO
