PATRIOT MAX & STANDARD EVAPORATOR PAN SET 2019
Page:
16
30.
`All parts have now been installed for the pans. Check to ensure the following connections are properly installed
and tight.
a.
3 hose connectors between the flue pan and the regulator box
b.
2 angle valve assemblies between the flue pan and the syrup pan
c.
2 draw off valves on the syrup pan
d.
Drain valve on the flue pan
e.
Thermometers
NOTE: Plugs and draw off box float should be set for Left Draw Off (See the Operating the Evaporator section)
28.
Place the hot sap float into the hot sap box positioned so the
adjustment finger on the side of the float stem are on the side of the
angle valve assembly.
29.
Turn the adjuster handle until the fingers are close to the top of
the float. Place the Z-arm fork so the sides of the fork on either
side of the stem and over the adjustment fingers. Slide the hook
on the other end of the Z-arm into the mounting bracket.
