LEADER Half Pint Evaporator
Year: 2014
Page: 10
BACK
1.
You will need 13 half bricks
2.
Cut bricks for the locations as labeled
a.
B1 – 4” X 6.5”
b.
B2 – 3.5” X 6.5”
3.
Apply a coat of cement to the back panel.
4.
Place the bricks into the arch as illustrated. Remember to coat the edges of the bricks with approximately 1/8”
of refractory cement.
5.
The end bricks of the bottom row will be behind the bottom row of the full bricks when the sides are bricked
(side bricks not shown in this diagram).
6.
Fill the gaps between the smoke stack elbow and the brick with refractory cement.
SIDES
1.
Both sides are laid out the same. Mirror the above diagram for the left side of the arch.
