LEAB Automotive -CPC
LEAB Automotive GmbH
Page - 11 -
2.5
Control display and fault descriptions
The control lamp (three-colour LED) on the front of the device indicates the different operating and fault
statuses:
The different statuses are indicated by permanent or flashing light. See section 2.2 on the position of the
LED.
LED display on the battery charger
Table 1: LED display on the CPC battery charger
* Pre-charging is not necessary for programs with start voltage 0 V
LED display on the optional remote display
If you have the optional LED remote display installed (see section 4.5), the CPC statuses will also be
displayed there in the same way as described above.
LED
Status
Description
Measure
Permanent light
orange
Battery is being charged, the CPC is in
the main charging phase
none
Permanent light
green
Battery fully charged, the CPC is in the
maintenance charging phase
The battery charger can be unplugged and the
battery used
Permanent light
red
No battery connected or connected
battery exhaustively discharged
Check the battery connection, measure the battery
voltage, pre-charge the battery using the power
supply*
Flashing
red
Time exceeded in the main charging
phase, charging interrupted
Battery faulty: Check battery
Battery too large for the battery charger: choose
larger battery charger
Parallel consumers too large: Switch consumers off
during charging
All manuals and user guides at all-guides.com
all-guides.com
