5
Notes
FIRING
: Upon cue, send full current into device, for one second, then cut
power. Device needs a quick on/off to work. You must cut power for the
gas to release. Do not leave power on as this will burn out coil!
DO NOT
operate from a dimmer board. Unit needs instant direct power; otherwise
ram will move too slowly and not have thrust to pierce Co2. Long power
cords may affect operation. (Voltage drop) If you have any questions, you
should contact your local dealer.
FIRING RESULTS
: The results you can expect depend on several factors
such as the type of streamers of confetti used, method of packing and the
size of the cylinder! The barrel need not be full to produce a good effect.
The best way to accomplish a desired effect is by trial and error. When
beginning, log in a notebook the way you load and what you are loading in.
Eventually you will assemble your own standard guidelines. However,
should you need any technical assistance, feel free to call us.
NOTE
: Any soft, safe, objects of your choice can be shot out of the barrel!
SAFETY WARNING – NEVER USE AEROTECHNIC PRODUCTS IF
THERE
ARE ANY OPEN FLAMES PRESENT!
Never point the muzzle
directly at anyone or look of the barrel when loaded. When using, keep
away from spectators and always aim way up, over the crowd. Be sure
barrel is locked into position and safety chain and clasp is attached. Use
caution when removing the Co2 cartridge, it gets very cold after firing!
MOUNTING
: If floor mounted, you may want to screw or secure base plate
to surface and secure power cord down, so it is not tripped over.
IMPORTANT
: Always lock barrel into position ensuring bayonet-retaining
clip has locked over bayonet pin, and safety chain and clasp has been
attached to aluminum angle brackets.
Summary of Contents for PRO LAUNCHER
Page 1: ...v 08 27 01 ...
