Arpa F & PC 150 LED User’s Manual – 1.0
Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy
Tel. +39 0376 771 777 – fax +39 0376 772 140 – email
– web www.ldr.it
8
PRO
, to enable access to all the functions
BASIC
, to limit access to functions 4.1 DMX or MANUAL MODE, 4.2 DMX ADDRESS and 4.13 Software version and
temperature control
Factory setting PRO.
8.15 RESET
The RESET control is a special function which allows to RESET the product to factory settings. To activate this function turn
OFF and ON the Cetra and press the rotary switch at power on. Select RESET with the rotary switch and press to RESET
Cetra to factory settings.
9. FUSE REPLACEMENT
The fuse holder is fitted on the rear of the unit.
Type: 6,3A 5x20mm, 250 VAC/DC fast blow fuse
CAUTION: Replace the fuse only when power is disconnected.
10. CLEANING AND MAINTENANCE
To ensure maximum performance of the product, a regular maintenance service should be carried out. Please make sure the
product is cold and disconnected from power supply when doing this.
•
clean all reflective parts such as reflector, mirror and lens opening the product, if necessary.
•
check the lamp and the lenses and replace any visibly damaged component.
•
clean air ducts and fans in order to allow a proper ventilation activity on the product.
•
check internal and external wiring and replace any cable which should be damaged by heat or mechanical agents.
11. SPARE PARTS
All components are available as spare parts. We strongly recommend you always use original LDR components as spare parts.
Please refer to our technical assistance should you need to order and/or replace any part of the unit.
12. WARRANTY
Our warranty covers all structural and manufacturing defects for a period of one year from the date of purchase. In case of
complaint, we strongly recommend that in the first instance you contact the local dealer who supplied the product to you. In
all cases, please refer to the serial number located at the rear of the spotlight.
