U S E R ’ S G U I D E
LDLC RS32
EN
Fig. 1
Fig. 2
Fig. 3
Fig. 4
2.2 Base Installation
We recommend you to place a soft piece of cloth before to avoid any damage on the
surface panel. Place the monitor on the desk, face down.
Fig. 1
: Hold and press the hat and then lift it up from the back cover.
Fig. 2
: Install the metal support to the back screw holes, use the 4 pcs machine
screws to lock the support and back.
Fig. 3
: Replace the hat cross the support.
Fig. 4
: Install the base to the screw hole below the support as the arrow direction,
and lock with 1 PC screw.
Disassembling
: Disassemble the base according to the opposite order above.
Do not place the monitor upside down for the base installation.
Note
: Handle with care when mounting LCD monitor stand. DO NOT touch the
surface panel. Mishandling or excessive pressure on the panel may cause damage
to the device. Always handle the monitor by the opposite sides in order to avoid direct
contact with the panel.
