User Manual: Rack mounting accesory19”ONE-500
ONE-RMA
8
Prepare the ONE-500 unit for installation
on the ONE-RMA support:
1. Make sure that the front of the
equipment is correctly oriented (see user
manual ONE-500)
2. Remove the 2 bolts from the lower
front corners of ONE-500
Place the ONE-500 unit on the ONE-
RMA support by putting the back side of
the equipment so that the vertical tabs of
the back piece (B) coincide with the slots
on the ONE-500 base.
Put the ONE-500 equipment on the
ONE-RMA support and fix them using the
supplied bolts
9
Push the assembled equipment until both
latches click.
5
