5
Check that the rear supports are in the
side of the structure assembled in steps
1 and 2
6
Screw the frontal (F) of the support ONE-
RMA to the rack using 4 M6 bolts (B6)
and 4 nylon packing rings M6 (W6).
Remember the lower bolt must coincide
with the step 4 height.
7
Extend the support to access the sides
from inside. Through the slots, bolt the
sides (L and R) to two holes with threads
of the rear supports (Rs) using 4 M4 (B4)
bolts
4
