User Manual: Rack mounting accesory19”ONE-500
ONE-RMA
2 INSTALLATION
Step View
Description
1
Joint the frontal piece (F) to the sides (L)
y (R) using 4 M3 bolts (T3)
2
Unfold the steel guide almost completely
and match the holes until the thread of
the rear piece (B) is visible. Attach the
back piece to the side pieces (L and R)
using 2 M3 bolts (B3)
3
Screw the rear supports (Rs) using 4 M6
bolts (B6) into the rear posts of the rack.
The general installation height of the
ONE-RMA support is determined by the
lower bolt of the rear supports that
coincides in height with the position of
the lower bolt on the front of the support.
4
Introduce the preassembly of points 1
and 2 in the desired rack position.
3
