1.4.6 CONFIGURATION. OUTPUT VOLUME
•
The output volume level of the MPS-8Z is configured with Zone 7 and Zone 8 buttons.
Press Zone 7 to increase the volume level and Zone 8 to decrease volume level. Each
time the button is pressed, the corresponding zone light will be shortly on. When the
volume level is at the maximum, the zone 7 light will remain on. When the volume
level is at the minimum, the zone 8 light will remain on.
•
To confirm the new configuration, press “TALK”, to cancel, press “CANCEL”.
2 SYSTEM REQUERIMENTS
•
ZES-22 firmware 1.0.5 or higher
•
ZES-22 Setup versión 4.1 or higher.
•
To allow audio input to channel 3 of the ZES-22 matrix, it must be configured as 3
inputs and one output (3x1) four inputs (4x0). This configuration can be set using the
ZES-22 Setup software.
For more information, please, contact with our Support Department at:
