Names and functions of components
You will find the following LEDs and interfaces on the front
and on the rear panel of EH-25MP.
Power LED
IR LED
Front panel view:
(1)
PWR LED
-- Power LED; Power LED is
green ON
when
power-on and
red ON
at standby mode. In standby mode, press
the POWER button on the remote control to power-on EH-
25MP again.
(2)
HDD LED
-- Hard drive LED; HDD LED is
blue blinking
when data is being read and the hard disk works
(3)
IR LED
–-- Infrared remote control LED; IR LED is
red
blinking
whenever the remote control signal is received
(4)
IR receiver
--- Infrared remote control sensor
9
