Installation of a HDD:
Power off first before HDD installation to prevent risks of
electric shock and damage of the HDD
The HDD must be set to “master” mode when inserted to
EH-25MP. If the HDD is set to “slave” mode, the HDD will not
work with EH-25MP properly. Normally the HDDs factory
default setting is “master”. Please make sure before you install
the HDD to EH-25MP.
21
5. Push the assembled HDD/PCB interface to the enclosure
while pushing the button, then release the button. Make sure
the HDD/PCB interface is locked to the enclosure. You should
not be able to pull it out anymore without pressing the button
on the enclosure.
