30
For HELP, call La-Z-Boy
®
Spas at 1.800.465.2933.
Mode
Depending on system configuration, mode changing may not be available and will be
locked in Standard Mode. Mode is changed by pressing “Temp Up,” then “Light”.
Standard Mode
maintains set temperature. will be displayed momentarily when
you switch into Standard Mode.
Economy Mode
heats the spa to the set temperature
only during filter cycles. will display when water temp is not current, and will
alternate with water temp when the pump is running.
Sleep Mode
heats the spa to
within 20°F/10°C of the set temperature only during filter cycles. will display when
water temp is not current, and will alternate with water temp when the pump is running.
Pump
Press “Pump ” to turn pump on or off, and to shift between low and high speeds. The
low-speed will turn off after 4 hours. High-speed will turn off after 15 minutes. Low-
speed may run automatically at times, during which it cannot be deactivated from the
panel, but high-speed may be operated.
Light
Press “Light” to operate the spa / hot tub light. The light automatically turns off after 4
hours. Continue to press the light button to change the light color or to activate the light
sequencing feature.
Filtering
Your hot tub uses the low speed of the pump to filter your water 24 hours a day. If the
water temperature exceeds the set temperature by 3 degrees then this pump will shut
off automatically till the temperature drops below the set point by approximately 1 ½
degrees.