9
10
1.1. HOW TO CHARGE BATTERIES
When it is first unpacked, the supplied battery pack is not
fully charged. Be sure to fully charge it before usage for a
minimum of 12 hours.
Connect with AC Adapter
Connect the AC adapter to the
charging terminal. The red
LED indicator on the cradle
will illuminate.
Resting on the Cradle
Put the remote unit on the
docking charger. Be sure to
align the contacts properly.
The blue LED indicator will
blink continuously to indicate
the LR is charging.
NOTES:
- When charging the remote control, be sure to
always use the supplied AC adapter.
- Do not try to charge devices other than the
remote control with the supplied AC adapter.
This could damage the AC adapter or the
connected device.
1.2. HOW TO FIND THE REMOTE
- Press find key on the charging cradle. The red LED
indicator will flash 4 times.
- Your LR will emit a continous series of beep tones.
- Press any key on the LR once it is located to turn off
the beep tones. Note, the LR will emit a series of beep
tones for 60 seconds if no key is pressed and then turn
off.