24
23
9.
PROGRAM SMART KEYS
You can program a sequence of steps into your LR such
as turn on your TV, turn on your DVD player, turn on
your home theater receiver and press play on your DVD
payer to watch a movie. All in sequence. You can also
program a time delay in the sequence. Each smart key
can program up to 20 steps. Please refer to the following
procedure.
9.1.
Hold down "
"
and "
VOLUME-
"
keys
on the remote simultaneously for 2 seconds until
you hear two beep tones. The blue LED indicator
lights continuously.
9.2.
Enter the smart code "0", "0", "0", "9". The blue
LED indicator will flash once and light
continuously. An icon " " will appear at the
bottom of the LCD screen.
9.3.
Press desired Smart key. (e.g. Smart 1)
9.4.
Press a command from the corresponding device
mode and the blue LED indicator will flash once
each time you press a key.
9.5.
Press and hold the command if you want to setup
the transmission period of this command (MAX
delay is 60 seconds).
9.6.
Repeat 9.4 to 9.5 until you finish the whole
program and press the same SMART key (e.g.
SMART 1) to store the program.
9.7.
To program another smart, repeat 9.1 to 9.6 above.
Note:
-
The LR comes with 6 SMART programs - Smart 1,
Smart 2, Smart 3, Smart 4 (Shift + Smart 1), Smart 5
(Shift + Smart 2), Smart 6 (Shift + Smart 3) each with
a maximum of 20 steps.
- On step 9.4, if 20 steps have been entered, the setup is
saved automatically. Your LR will exit the smart key
programming mode.
Smart
-
On step 9.4, if no key is selected for more than 8
seconds, the blue LED indicator will flash
six times
and the smart key programming mode will exit
automatically.
- To operate a programmed smart key sequence, aim
your LR at the equipment. Press and release the
SMART key you have programmed.
10.
RESET TO FACTORY DEFAULT
10.1. Hold down "
"
and "
VOLUME-
"
keys
on the remote simultaneously for 2 seconds until
you hear two beep tones. The blue LED indicator
lights continuously.
10.2. Enter the reset code "9", "9", "9", "9". The blue
LED indicator goes out immediately. All settings
are now cleared to factory default setting.
If your remote control is locked up for any reason,
you can reset it by pressing the reset button inside
the battery compartment. Please refer to below
illustration.
11.
MAINTENANCE
-
Do not expose your LR to dust, strong sunlight,
humidity, high temperature or mechanical shock.
-
Be sure to use only the rechargeable nickel metal-
hydride (Ni-MH) battery pack that is supplied
with the remote controller.
-
Do not use corrosive or abrasive cleaners on your
LR.
-
Keep the unit dust free by wiping it with a soft dry
cloth.
-
Do not disassemble your LR; it contains no user-
serviceable parts.
10.3.
