mc²56 MKII Technical Manual
V5.10.2/1
65
Chapter 2: Installation
System Connections
Ethernet A
This port connects the console control surface to the control system on the Nova73 Router Module MKII (980/33).
Connections are made via TCP/IP Ethernet. Only one connection (to the active Router Module) is essential for
operation; the second is required if a redundant Router Module is fitted:
Use a straight (1:1) network cable (STP-CAT 5 with RJ45 connectors):
1.
Connect either of the control surface
ETH A
ports (on the
) to the first Nova73 Router
Module.
·
On the control surface, you can use either port (
ROUTER 1
or
ROUTER 2
).
·
On the Nova73, make sure you connect to
ETHERNET A
(and not
).
Control Surface Rear
Nova73 Router Module MKII Front
2.
If a redundant Router Module is fitted to the Nova73, then run a second network cable from the spare
control surface port (
ROUTER 1
or
ROUTER 2
) to the redundant Router Module (
ETHERNET A
).
This second connection is essential to support
3.
You can now
to boot and
Summary of Contents for mc256 MKII
Page 1: ...Technical Manual mc 56 MKII Version 5 10 2 1 Edition 12 September 2017...
Page 350: ...mc 56 MKII Technical Manual V5 10 2 1 350 Chapter 7 Appendices Local I O Wiring...
Page 351: ...mc 56 MKII Technical Manual V5 10 2 1 351 Chapter 7 Appendices Local I O Wiring...
Page 352: ...mc 56 MKII Technical Manual V5 10 2 1 352 Chapter 7 Appendices Local I O Wiring...