mc²56 MKII Technical Manual
V5.10.2/1
239
Chapter 4: Service/Maintenance
GUI Diagnostics
GUI Diagnostics
The console's Central GUI, or an mxGUI computer running online, provides the following system diagnostics:
Nova73/DALLIS Status
If a Nova73 or DALLIS component fails, or a connection is lost, then a hazard warning flag appears in the title bar
of the console GUI. Use the
display to interrogate the source of the problem. This display
monitors all the Nova73 and DALLIS components which are defined in the
.
Control Surface Connection
If a
Router Module and Ethernet connection to the control surface are installed, then the operator is
presented with an error message should the active connection fail. They can then decide to
investigate the cause of the problem.
Control Surface Power
On the right of status bar, the console GUI offers
for all power supplies. You will see a red circle
with an exclamation mark if a supply has failed.
Redundant Control System Takeover
If a redundant Router Module MKII is fitted to the Nova73, then you can force a
control system, either from the
System Settings
display or by pressing the recessed button on the front of the
Router Module.
Prepare Cold Start
The system can be set to
, following the next reboot, using the
Prepare Coldstart
option in the
System
Settings
display.
Bulb Test, Fader Calibrate, OLED Saver Enable
These options, in the
System Settings
display, can be used to test the control surface illumination, calibrate the
faders or enable the OLED display saver (recommended to prolong their lifespan). See the "mc²56 MKII Operators
Manual" for details.
Summary of Contents for mc256 MKII
Page 1: ...Technical Manual mc 56 MKII Version 5 10 2 1 Edition 12 September 2017...
Page 350: ...mc 56 MKII Technical Manual V5 10 2 1 350 Chapter 7 Appendices Local I O Wiring...
Page 351: ...mc 56 MKII Technical Manual V5 10 2 1 351 Chapter 7 Appendices Local I O Wiring...
Page 352: ...mc 56 MKII Technical Manual V5 10 2 1 352 Chapter 7 Appendices Local I O Wiring...
