crystal User Manual
Version: 6.6.0/2
231/459
12. Routing Matrix
12.2.3
Matrix Query
"Connect -> Matrix Query"
This element provides the ability to monitor the status of a matrix connect, and produce a "logical 1" control
signal if the connect is removed. For example, to trigger an alarm if a specific crosspoint is removed.
Every “Matrix Query” can monitor an internal or external matrix address. Note that the input and output you use
must have their
option set.
Matrix Query
Reference name for the element.
Matrix Input
Enter the address of the matrix input to be monitored (see
).
Matrix Output
Enter the address of the matrix output to be monitored (see
).
External
Select this checkbox if the matrix to be controlled is external (i.e. not within the system
frame).
External Protocol Type
If
External
is ticked, select the communication protocol type:
·
CAN over TCP/IP
- for sapphire, crystal, Nova29 or Power Core.
·
MNOPL
- for mc
2
/Nova73.
·
EmBER+
- for supporting EmBER+ devices.
Ember+ Matrix Nr
When using
Ember+
, you must enter an Ember+ Matrix number (from
1
to
5
). This
element (which defines the local consumer number, external
matrix type, matrix name, etc.)
