crystal User Manual
Version: 6.6.0/2
398/459
20. Networking Options
20.4.3
Ember+ Matrix Control
The
Ember+ Matrix
element allows an Ember+ consumer to control crosspoints within an Ember+ provider.
The element does not control any crosspoints directly, but is referenced from other elements including a
and
.
There are three parts to the configuration. First, define the system to be an
-> Definition -> Parameter = Local Consumers"). Then define an
Ember+ Matrix
element as described below.
Then, on the Ember+ provider, publish the matrix you wish to control.
Ember+ Matrix Parameters (on the Consumer)
On the consuming device, add an
Ember+ Matrix
element to the "Ember+" branch of the 'Tree Definition':
EmBER+ Matrix
Reference name for the element.
Matrix Nr
Assign a number to the matrix - this will be referenced from the controlling element (e.g. from a
).
Local Consumer Nr
you wish to use (as defined under “System -> Definition -
> Parameter = Local Consumers”).
Matrix Type
Select the external matrix type you wish to control:
·
Nova17
- for sapphire, sapphire compact, crystal or Nova17.
·
Nova29
·
Nova73
·
Vpro8
·
BFE
- for BFE KSC Core Matrix.
Matrix Name
The name will reference to the
Ember+ Name
defined in the "System -> Definition ->
Parameter = Matrix Ember+ element on the providing device (described below).
Ember+ Matrix Parameters (on the Provider)
On the providing device, open the "System -> Definition -> Parameter = Matrix Ember+" branch of the 'Tree
Definition:
Parameter
Matrix Ember+ – reference name for the element.
Local Provider Nr
Sets the Local Provider
(defined under "System -> Definition -> Parameter = Local
Providers").
Ember+ Name
This option allows a local matrix to be controlled by an Ember+ consumer. The name must
match the
Matrix Name
defined in the "Ember+ Matrix "element on the consuming device
(described above).
