LawnMaster MEB1014K, Operator'S Manual

Page: 7 / 31

7
IMPORTANT SAFETY INSTRUCTIONS
MAINTENANCE AND STORAGE
■ Use caution when servicing blades. Wrap the blade(s) or wear gloves. Replace damaged blades.
Do not repair or alter blade(s).
■ Store idle lawn mower indoors. When not in use, lawn mower should be stored in an indoor dry and
locked-up place-out of reach of children.
■ Maintain lawn mower with care. Keep cutting edges sharp and clean for best and safest
performance.
■ Check the blade and the engine mounting bolts at frequent intervals for proper tightness.
■ Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.
■ Check bag frequently for deterioration and wear, and replace worn bags. Check that replacement
bags comply with the original manufacturer's recommendations or specifications.
■ Replace the blade if it is bent or cracked. An unbalanced blade causes vibration that could damage
the motor drive unit or cause personal injury.
■ Clean the blade thoroughly and check its balance by supporting it horizontally on a thin nail through
its centre hole. The nail should also be in a horizontal position. If either end of the blade rotates
downward, remove some metal from the heavy or lower end until the blade is balanced. It is
balanced when neither end drops.
■ Follow instructions for lubricating and changing accessories.
■ Inspect lawn mower cord periodically and if damaged, have it repaired by an authorized service
facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and
free from oil and grease.
■ Keep guards in place and in working order.
■ Keep blades sharp.
■ Keep hands and feet away from cutting area.
■ Objects struck by the lawn mower blade can cause severe injuries to persons. The lawn should
always be carefully examined and cleared of all objects prior to each mowing.
■ If lawn mower strikes a foreign object, follow these steps:
- Stop lawn mower. Release the switch
- Disconnect from the power supply.
- Inspect for damage.
- Repair any damage before restarting and operating the lawn mower.
■ When servicing use only identical replacement parts.
ELECTRICAL INFORMATION
TO AVOID ELECTRICAL HAZARDS, FIRE HAZARDS, OR DAMAGE TO THE TOOL, USE
PROPER CIRCUIT PROTECTION. YOUR LAWN MOWER IS WIRED AT THE FACTORY FOR 120V
OPERATION. CONNECT TO A 120 V, 15 A CIRCUIT, AND USE A 15 A TIME-DELAYED FUSE OR
CIRCUIT BREAKER. TO AVOID SHOCK OR FIRE, IF THE EXTENSION CORD IS WORN, CUT OR
DAMAGED IN ANY WAY, REPLACE IT IMMEDIATELY.
WARNING