background image

10

SYMBOLS

SYMBOL

NAME

DESIGNATION/EXPLANATION

V

Volts

Voltage

A

Amperes

Current

Hz

Hertz

Frequency(cycles per second)

W

Watt

Power

hrs

Hours

Time

Class II Construction

Double-insulated construction

Safety Alert

Precaution that involves your safety.

Read The Operator’s 

Manual

To reduce the risk of injury, user must read and 

understand Operator’s Manual before using this 

product.

Do not mow up and 

down slopes!

To avoid the risk of injury do not mow up and down 

slopes. Always mow across slopes. (Angle ≤15°)

Keep all persons and 

pets at a safe distance 

from the mower while 

operating!

To avoid the risk of injury to bystanders keep all 

persons and pets at a safe distance from the mower 

while operating.

Keep hands and feet 

clear of mower deck 

and discharge opening 

at all times!

Rotating blades can cause serious injury.

Keep hands and feet clear of mower deck and 

discharge opening at all times. Always be sure 

blade has stopped after releasing switch lever and 

unplugging before removing and replacing collection 

bag, cleaning, servicing, transporting or lifting the 

mower.

Stay behind the handle 

when the motor is 

running!

Objects struck by mower blade can cause serious

injury. Stay behind the handle when the moto is 

running. Always ensure persons and pets are clear 

of the discharge from the mower while operating.

Some of the following symbols may be used on this product. Please study them and 

learn their meaning. Proper interpretation of these symbols will allow you to operate 

the product better and safer.

Summary of Contents for MEB1014K
































Reviews: