26
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Mower is hard to push.
High grass and low
cutting height. Rear of
mower housing and blade
dragging in heavy grass.
Raise the cutting height.
Mower vibrates overly
and makes excessive
noise.
The cutting blade is not
assembled securely.
Tighten the blade bolts.
The blade is not balanced.
Sharpen and balance the blade
following instructions in this manual (see
page 22-23). Or replace the blade.
The motor shaft is bent.
Stop the mower and unplug it from
the power supply. Have the mower
inspected and repaired by an authorized
service center before restarting.
Summary of Contents for MEB1014K
Page 27: ...27 EXPLODED VIEW MEB1014K EXPLODED VIEW...
Page 30: ...30 NOTES...
Page 31: ...31 NOTES...
