5
A STEELFORT PRODUCT
The following steps apply to electric start:
1.
Connect the battery cable before the first use.
2.
Unscrew the fixing bolt on the right
maintenance panel and remove the
maintenance panel.
3.
Connect the battery harness, put the right
maintenance panel back in place, and tighten
the bolts.
Also, make sure that the combination switch lever
is not pressed down by the right maintenance panel
when installing the right maintenance panel back
into place.
USAGE OF HANDLE
CAUTION
Make sure the generator is placed on a level ground
before using the handle.
After the handle button is pressed, the telescopic
handle will pop out automatically; hold the lever and
pull out the handle. The handle makes a “click” sound
indicating that it has been pulled out completely, and
in this case, the generator can be moved.
HANDLE RESET
Press the handlebutton and hold the lever, push it
inward towards the generator to the original position
until the handle makes a “click” sound, indicating that
it has been reset.
