27
MAINTENANCE
REPLACING WHEELS
(See Fig. 28)
To replace a wheel (10 or 14):
NOTE
: before replacing a rear wheel (14), set the mower at the highest position.
■ Remove safety key (19) and battery (21) at first before replacing the wheel.
■ Turn the mower upright.
■ Push the inner hubcap tabs from inner side of the wheel, by using a flat head screwdriver or other
adequate tool.
■ When all inner hubcap tabs have been depressed, the hubcap should become free allowing
access to the axle.
■ Remove the cotter pin using a pair of pliers, and slide the washer off the axle.
■ Remove the wheel, replace with a new identical replacement wheel.
■ Reinstall the washer and press cotter pin back into place. Reinstall the inner hubcap. Make sure
all tabs are locked into place.
NOTE:
Servicing or replacing requires extreme care, knowledge and skills, and we suggest it be
performed by a qualified service technician. You can return the product to your nearest
SERVICE
CENTER
for repairing or replacing. When servicing, use only identical replacement parts.
WHEEL
WHEEL
Tab
Tab
Fig. 28
Cotter Pin
Washer
