Rod
ASSEMBLY
14
ASSEMBLING THE COLLECTION BAG
(See Figs. 2-3)
Your LawnMaster
®
mower comes with a tool-less collection bag.
To assemble:
■ Check the collection bag before assembling to make sure there is no damage.
■ Pull the collection bag over the steel frame as shown.
■ Pry open the soft plastic clamping sleeves with your fingers and insert the steel frame into the
sleeves as shown. Ensure all sleeves are properly clamped with your fingers on the frame.
■ The completely assembled collection bag is shown as below.
INSTALLING THE COLLECTION BAG
(See Fig. 4)
NOTE:
When using the collection bag, do not install the mulching plug (17). Mulching plug MUST
be removed prior to installing collection bag.
■ Lift the rear safety flap (16) and hold it in position.
■ Lift the collection bag by its handle, hook the rods of collection bag on the mower holder under
rear safety flap.
■ Release the rear safety flap.
■ Make sure both rods are firmly seated on the holder and rear safety flap (16) rests firmly against
the top of the collection bag.
NOTE:
Under normal usage, bag material is subject to wear. To reduce the risk of injury, frequently
inspect the bag assembly and replace if there are any signs of wear or deterioration.
Fig. 2
Fig. 3
Steel Frame
Sleeve
Fig. 4
Holder
Mulching plug must be removed
prior to installing collection bag.
Rods
