20
ASSEMBLY
A flashing LED on the cutting mode control panel indicates that the current is too high. A flashing
LED on the battery indicates that the voltage is too low. In either case the motor will be shut down
automatically. Do not continue to activate the On/Off switch if the motor has been shut down
automatically. The battery may be damaged.
WARNING
iPOWER MOWER MODE INDICATOR (20a)
(See Fig. 18)
Located on upper mower handle
■
By default, the motor power is set to “AUTO” and will automatically
adjust to your lawn.
■
Push the press button repeatedly to cycle through the different
motor power levels.
• Set the motor power to “1”, if your lawn needs only light mowing.
• Set it to “2”, if you are going to mow taller and thicker grass.
• Set it to “3” to utilize the maximum motor power for mowing the
most stubborn grass.
iPOWER BATTERY METER INDICATOR (20b)
(See Fig. 18)
■
Push the press button to check on the battery status.
■
The number of lights lit will depend on the condition of the battery.
■
4 lights indicate a fully charged battery, 1 light indicates the battery
needs to be charged.
iPower Control Panel (20)
Fig. 18
20a
20b
