background image

10

SAFETY INFORMATION

Battery Safety Information

■  Recharge only with the charger specified by the 

manufacturer. A charger that is suitable for one type of 

battery pack may create a risk of fire when used with 

another battery pack. Incorrect use may result in electric 

shock, overheating or leakage of corrosive liquid from the 

battery.

■  Do not place appliances or their batteries near fire or heat 

sources. Continuous intense sunlight, fire or other heat 

sources may cause an increased danger of explosion.

■  Do not crush, drop or damage the battery pack. Do not 

use a battery pack or charger that has been dropped or 

received a sharp blow. A damaged battery is subject to 

explosion. Properly dispose of a dropped or damaged 

battery immediately.

■  Batteries can explode in the presence of a source of 

ignition, such as a pilot light.

■  To reduce the risk of serious personal injury, never use 

any cordless product in the presence of an open flame. 

An exploded battery can propel debris and chemicals. If 

exposed, flush with water immediately.

■  Do not charge battery in a damp or wet location. Following 

this rule will reduce the risk of electric shock.

■  For best results, your battery tool should be charged in a 

location where the temperature is more than 4°C but less 

than 40°C.

■  Under extreme usage or temperature conditions, battery 

leakage may occur. If liquid comes in contact with your 

skin, wash immediately with soap and water. If liquid gets 

into your eyes, flush them with clean water for at least 10 

Summary of Contents for CLBL6015ACE

























Reviews: