LawnMaster CLBL6015ACE, Instruction Manual

Page: 14 / 24

14
ASSEMBLY
Assembly Preparation
■ Carefully remove all contents from the product packaging.
■ Ensure you have all the accessories and tool(s) needed for assembly and operation. This also
includes suitable personal protective equipment.
Blower Assembly (See Fig. 1)
■ Insert the widest end of the blower tube onto the mounting clips located on the blower motor
unit.
■ Align the locking mechanism and turn clockwise to secure into place. The blower tube can only
be attached one way.
■ Insert the concentrator nozzle into the blower tube and turn clockwise to lock into place.
Installing/Removing the Battery Pack (See Fig. 2)
IMPORTANT! Before using the blower, read all safety precautions and follow the instructions in
the Battery Pack and Charger section. If storing for a prolonged period of time, remove the battery.
■ Replace the battery pack or the charger immediately if the battery case or charger cord is
damaged.
■ Verify that the switch is in the OFF position before inserting or removing the battery pack.
■ Verify that the battery pack is removed and the switch is in the OFF position before inspecting,
adjusting, or performing maintenance on any part of the blower.
■ Read, understand, and follow the instructions contained in the section entitled Battery Pack
Operation and Charger Operation.
To Install the Battery Pack (Fig. 2)
■ Align the support rails located on the battery chamber with the guide rails on the battery pack.
■ Slide the battery pack fully towards the handle until the latch locks into place. Ensure it is
secured.
To Remove the Battery Pack (Fig. 2)
Press the release button on the battery pack and remove it from the product in the reverse action
to installing.
NOTE: The battery pack fits onto the blower snugly in order to prevent accidental dislodging.
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire:
WARNING