1 2
HEDGE TRIMMER INSTRUCTIONS MANUAL
7. OPERATION
HOW TO USE THE HEDGE TRIMMER
1)
Hook the belt sling (fig. 11 item 1) onto the
ring (fig. 11 item 2).
2)
Hold the hedge trimmer on the right side as
shown in fig.11
(see Brush Cutter user
manual).
DURING OPERATION
If a dangerous condition occurs,
immediately switch off the engine by
pressing the switch to the OFF
position.
This product is not electrically
isolated. Make sure there are no
electric cables or high voltage
cables in the working area.
DANGER OF ELECTRIC SHOCK
Always hold the hedge trimmer with both
hands. Operate it by fully depressing the
throttle lever.
PREPARATION:
Remove dry branches, twigs or
any other material thet could obstructs the cutting
operation.
VERTICAL CUT - Carry out fitting A = 0 ° or
B = 90° (fig. 7):
then adjust the blade angle as
required (see fig. 13).
LOW HORIZONTAL CUT - Carry out fitting A =
0° (fig. 7):
then adjust the blade angle as
required (see fig. 14).
HIGH HORIZONTAL CUT - Carry out fitting
C = 180° (fig. 8):
then adjust the blade angle as
required (see fig. 15).
HIGH HORIZONTAL CUT (or hedge top):
adjust the hedge trimmer operating angle
as shown in fig. 15 to cut the top of a high
hedge.
8. MAINTENANCE AND TRANSPORT
For maintenance operations relating to the
engine, see the enclosed Brushcutter manual
LK PBT3446 AUTO MULTITOOLS.
CHECKING THE SCREWS AND MOVING
PARTS
#
Before each use, check that there are no loose
screws or parts and that the cutting device has
no cracks or is excessively worn.
#
Replace any damaged parts before use.
BLADES
#
If a reduction in cutting performance and
efficiency of the hedge trimmer is experienced,
the blades need to be sharpened.
THIS
OPERATION SHOULD BE CARRIED OUT BY
A SPECIALISED SERVICE CENTRE.
Do not use the hedge trimmer if the
blades are worn or damaged in order
to avoid damages and possible
personal injury.
CLEANING
#
Periodically:
- clean the blades, check their conditions and
do maintenance (as spray with lubricants and
tree sap repellent).
- protect using the blade guard (fig. 12).
