13
5. PREPARING TO WORK
CHECKING THE MACHINE
Before starting work please:
- Check that ail the screws on the machine and the cutting device are tightly fastened;
- check that the air filter is clean;
- check that the protection devices are well fastened and working efficiently;
- check the handgrips are well fastened.
PREPARING THE FUEL
This machine is fitted with a two-stroke engine which requires a mixture of petrol and lubricating oil.
Using petrol alone will damage the motor and will cause for invalidation of the
warranty.
Only use quality fuels and oils to maintain high performance and guarantee the
duration of the mechanical parts over time.
Petrol characteristics
Only use unleaded petrol with a fuel grade of at least 91 N.O.
Unleaded petrol tends to create deposits in the container if preserved for
more than 2 months. Always use fresh petrol!
Oil characteristics
Only use top quality synthetic oil specifically for two-stroke engines.
Your dealer can provide you with oils which have been specifically developed for this type of
engine, and which are capable of guaranteeing a high level of protection.
IMPORTANT
IMPORTANT
IMPORTANT