19
8. Adjusting
Fuel adjustment
The carburetor has been adjusted to the optimum
fuel supply at the factory. Don’t reset the
carburetor setting.
Note:
If adjustment is needed, if should be performed by your authorized
dealer.
10. Attach the equipment to the shoulder strap that has been put on (see chapter on “Putting
on the Shoulder
Strap”).
11. To mow, hold the throttle lock depressed and operate the throttle.
12. STOPPING
• Move the throttle lever on the equipment to the fully CLOSED (engine idle speed) position,
and the engine running at idle speed.
• Turn the engine switch to the “O” (stopping) position.
Notice:
Suddenly stopping engine from high speed operation can cause engine damage. Reduce
engine speed to idle speed to idle speed for one minute before shutting engine off after high-
speed,
Emergency stop -
Turn the engine sw
itch to the “O” (stopping) position.
Working Notes
• When cutting, observe the country specific / local regulations.
• Do not cut during commonly applicable quiet periods.
• Solid objects such as stones, metal pieces or similar must be removed. These can be thrown
out and therefore result in personal or property damage.
• When cutting in high bushes or hedges, the working height should be at least
15 cm. This prevents the risk to animals, e.g. hedgehogs.
Work safely and considerately!
• Always hold the equipment firmly and securely with both hands.
• Cut only grass and weeds. Be aware of roots or tree stumps – risk of tripping.
• Work considerately and endanger nobody when cutting. Work quietly and carefully.
• Work only in adequate visibility and lighting conditions.