11
ASSEMBLY
Employ only original parts. Danger of injury.
1 Flat nozzle
2+3 Two-part blower/vacuum tube
5 Carrying strap
13Collection bag with bag holder nozzle
20Leaf blower engine part
Before putting the device into operation, the blower / suction tube must be completely
mounted and screwed tight and the collection bag and carrying strap must be attached.
The impeller wheel cover must be closed and the attachment screws must be tightened
all the way.
UNPACKING:
Unpack the device and check whether it is complete:
Mounting of blower / suction tube:
A
Make sure the tubes are held straight during mounting.
1. Connect the two parts of the blower / suction tube (2+3).
2. Fasten down the tube sections using the smaller enclosed screws .
3. Insert the blower / suction tube into the blower / suction opening on the engine
component (20). Use the guide rail on the engine component as an aid.
4. Fasten down the tube and engine component using the larger enclosed bolts and nuts .
Mount flat suction nozzle:
5. To work with the flat suction nozzle (1), push it onto the suction opening (2) on the
tube until the lateral clips engage. To remove the nozzle, pull the clips on the nozzle
apart and pull the nozzle out of the tube.
Mount collection bag:
6. Place the retainer frame (21) onto the opening on the engine components. Press the
retainer frame over the engagement strip until the coupling lever engages.
Suction operation is only permissible with the collection bag mounted.
7. Connect the collection bag retainer loop to the blower / suction tube.
Mount carrying strap:
8. Hook the carrying strap (5) onto the attachment bar (22).
The two parts of the tube engage, whereupon they cannot be disengaged for safety
reasons.
Summary of Contents for LK BV 30 AUTO
Page 2: ......
