The Front Panel
7
CH1/M
ONO
I
NPUT
This ¼” input receives
CH1
when recording two channels. When nothing is connected to the
CH2 Input
,
CH1
is routed to
both
CH1
and
CH2
of the headphone mix as a MONO input.
CH2
I
NPUT
This ¼” input receives
CH2
when recording two channels.
S
ELECTION
I
NDICATOR
LED
S
Each LED in this group of 4 indicates a possible selection for the
Rotary Knob
, and has an adjacent label
printed to the left of each LED. Only 1 LED will ever be illuminated at a time. The LEDs correspond (from top
to bottom) to the following Volume control selections:
STEREO
,
CH1
,
CH2
,
CH1+2
.
S
ELECT
B
UTTON
This button selects which of the 4 Volume settings the
Rotary Knob
currently controls. This button also
selects the corresponding
Selection Indicator LED
to be illuminated.
R
ESOLUTION
B
UTTON
This button toggles the Volume adjustment step size of the
Rotary Knob
between 3dB and ½dB.
V
OLUME
D
ISPLAY
This 3 digit display reads out the relative Volume level (dB) of the current selection. The minimum level is
“00.0” and the signal is
Muted
. The maximum level is “66.0”.
R
OTARY
E
NCODER
V
OLUME
C
ONTROL
K
NOB
Rotation of the Rotary Knob adjusts the Volume of the selected signal in the Headphone Cue mix, as
indicated by the
Volume Display
. Clockwise rotation increases the selected Volume, and Counterclockwise
rotation decreases the selected Volume. The size of the Volume adjustment of a rotational step is controlled
by the
Resolution Button
.
LK-Solo Volume settings do not affect the recorded signal. They only control the headphone cue mix.
Once the Volume reaches the top or bottom of the range, the knob may continue to be turned, but no
further Volume adjustments are made.
The Volume setting does not change until the
Rotary Knob
is turned. This allows the user to “step through”
the other Volume settings by repeatedly pressing the Select Button.
