Specifications
13
Specifications
The LK-Solo inputs accept both “+4” professional line level and
“-10” (consumer) line level signals. Inputs may be either balanced or unbalanced.
With the exception of the Headphone output, each of the outputs of the LK-Solo is hard-wired to an input.
As such, the output signals are identical to their respective input signals. Therefore, the levels are un-
attenuated, and the balance/unbalanced wiring of the output cables should be the same as that of their
respective input cables.
The headphone output is designed for a maximum output level of +18 dBu. An appropriate adapter can be
used to connect headphones with a 1/8” (mini) plug.
The unit automatically adjusts to power inputs in the range of 83-265VAC, 47-63Hertz. No change of settings
is necessary.
Dimensions: 8”W x 1.75”H x 10.75” D (front panel to rear panel connectors; front panel knob adds 5/8”)
An optional Rack Mount Kit is available which can be used to mount any combination of two LavryBlack
1/2 rack units in a 1U 19” rack space. Please note that this kit cannot be used to rack mount a single LK-
Solo. Weight: Unit ~5lbs.
Shipping weight: ~6 lbs.
When an input signal is not in use, it is advisable to mute the Volume for that signal to prevent additional
noise from entering the headphone mix.
