Translation of the original instructions
DESCRIPTION OF THE APPLIANCE
(see fig.6)
1 Dust and/or water container
2 Pivoting wheels
3 Hose inlet
4 ON/OFF switch
5 AUTO switch automatic simultaneous ignition
switch for power tools (depending on the model)
6 Socket panel for connection to power tools (depen-
ding on the model)
7 Clasp to open dust collection compartment
8 Lid
9 Handle
10 Air outlet grid
11 Power supply cable
12 Spline
13 Guides
(A) Single or double layer paper bag
(B) Paper cartridge filter
(C) Filter in polyurethane foam
(only for wet & dry models)
(D) Basket with safety float
(only for wet & dry models)
(E) Outlet filter of motor cooling air
(only for wet & dry models)
(F) Air outlet filter (according different models)
ACCESSORIES PROVIDED
(according different models)
* : optional
(see fig.5)
A1 hose complete with handle and connection
B1 extension tubes in metal or plastic B metal telescopic
tube
C1 crevice tool
D1 upholstery nozzle
E 1 dual-purpose brush or multi-purpose brush with
accessory for hard-floors and water
ASSEMBLY INSTRUCTION
•
Before using the appliance always check that all the
filters provided are in the correct position.
- Position the polyurethane filter around basket (D)
(figure 7, position 1).
- Position cartridge filter (B) in its seat (figure 7, position
2-3).
- When using bag (A), make sure the bag's flange is
properly inserted into the appropriate grooves 13 in
the dust and/or water container (figure 7, position 4).
Insert the bayonet cap at the end of the flexible hose
into the inlet 3 and turn clockwise until locked as
shown in fig. 2.
Join the extension tubes together or adjust the length of
the telescopic tube by using the release button, and
then connect the tubes or tube to the handle on the
hose applying light pressure.
To the other end attach a suitable accessory:
fig.5:
-The dual-purpose brush cleans hard floors, carpets
and textile surfaces. To extract or remove the bristle
strip push the button on the brush.
-The multi-purpose brush provided is suitable for
cleaning carpets and textile surfaces.
-To clean hard surfaces and for vacuuming water it is
necessary to attach the provided insert into the brush
head.
To fit the inserts, gently push the accessory into the main
brush head until the hooks click into the side slots on
the brush head as shown in fig. 3
All the accessories provided can be attached to the end
of the tubes or directly to the handle.
sound pressure level : LpA = 79 dB (A)
Arm vibrations
0,10 m/s
2 -
K (uncertainty) 0,5 m/s
2
11
Summary of Contents for PRO WORKER EM
Page 59: ...59...
