21
22
Part No. .................................................................
1/A Base................................................................
2/A Steam switch...................................................
(push- button)
3/A Temperature lamp (orange).............................
4/A Temperature regulator.....................................
5/A Steam hose (flex.) with coupler plug ...............
Function
isolated protection on which the iron can be placed.
steam discharge during ironing.
indicates when the iron is ready.
regulation of the ironing temperature desired.
connection with steam cleaner.
Please note:
this machine can be equipped with different types
of irons, according to the accessories or technical
specifications required.
Caution!
• Make sure that the safety pin (14) is connected firmly, by drawing it a little.
Remove the steam hose
Disconnect the heating switch (5).
Keep the steam nozzle (16) in a wash-basin
Push the steam button (15) on the handle until the remaining steam has completely
come out of the boiler.
Disconnect the main switch (4).
Move the electrical plug (7) from the supply socket.
Lift the safety cap (21).
Remove the quick coupler plug (12).
Put a protection cloth (optional)
Warning:
• Cotton cloths are used to protect surfaces from
scratches.
• Be careful ! Cloths become hot while you do the cleaning.
• Change the cloth only after unplugging the steam cleaner!
• Dirty cloths can be washed in the washing-machine.
Put a protection cloth on a plane surface.
Lay the scrubbing brush (19) in the middle of the
cloth.
Push the cloth holding spring clamps (20) and
keep them pressed.
Put two corners of the cloth under the spring clamps
(20) from behind.
Now put the front half of the cloth under the spring
clamps (20) and release them.
Put the cotton cap on the triangular brush.
This cotton cap is properly designed to fit the triangular brush.
20
19
Fit the small brush
Warning:
• The small brush must be used only together with the
bent nozzle.
Fit the small brush into the bent nozzle.
Fit the bent nozzle into the pipe (17) or into the
steam nozzle handle (16).
Cleaning of glass
Caution!
• If external temperatures are around the freezing-point, the window glass can be slightly
sprayed with steam at a distance of cm. 20, at least.
• After that, you can treat the whole glass surface with steam to offset sudden changes in
temperature and to avoid tensile stress on the glass surface.
• Sudden changes in temperature between glass and steam can break the glass.
Fit the window cleaner
Push the spring button (18) on the steam nozzle handle (16) or on the extension pipe
(17).
Fit the window cleaner into the steam nozzle handle (16) or into the extension pipe (17)
until the spring button (18) snaps.
Warning:
• Very dirty windows must be cleaned first with the small or big brush and the cloth.
• Then, you can clean the window with the window cleaner.
• After cleaning, remove dirt from the rubber band of the window cleaner with a clean cloth.
Only a clean and well stretched band allows a perfect cleaning of the window without stripes.
Spray the window with steam from the top to the bottom
Remove dirt with the rubber sponge.
Lay the wiper rubber band on a part of the window treated with steam.
A
1
2
3
4
5
Iron (it can be only applied to the models supplied with a
coupler plug)
