![background image](http://html2.mh-extra.com/html/lavor/dart/dart_manual_3933199028.webp)
28
1.
GENERAL INFORMATION
1.1.
MANUAL PURPOSE
To make it easier to read about and look up various
subjects, refer to the table of contents at the
beginning of the section in your language.
This manual has been prepared by the manufacturer
and is an integral part of the product. As such, it must
be kept in a safe place for the machine’s entire service
life until demolition.
The customer must ensure that machine operators
have read or are familiar with the contents of this
manual so that they strictly follow the instructions
described herein.
Constant compliance with the instructions provided
in this manual is the only way to guarantee the best
results in terms of safety, performance, efficiency
and service life of the product you now own. Non-
compliance with these rules may cause injuries to
people and damage to the machine, the scrubbed
surface and the environment: in no case can such
injuries or damage be attributed to the manufacturer.
This manual refers in detail to the machine and
provides instructions and descriptions only about our
batteries and battery chargers (optional).
The batteries and the battery charger are basic
complementary machine parts and will affect its
operation in terms of running time and performances.
Only the correct combination of the two accessories
(batteries and battery charger) will ensure the
highest possible performances and avoid wasting
lots of money. For more detailed information refer
to the special battery and battery charger manuals.
Our recommended battery chargers and batteries
(optionals) ensure the best combination with the
machine and offer outstanding versatility (battery
charger) as well as the category’s highest quality and
performance standards.
1.2.
TERMINOLOGY AND SYMBOL LEGEND
For the sake of clarity and to efficiently highlight
the various aspects of the instructions provided,
terms and symbols were used that are defined and
illustrated here below:
- Machine.
This definition replaces the commercial
name to which this manual refers.
- Operator.
‘operator’ means the person or persons
given the task of installing, operating, adjusting,
maintaining, cleaning, repairing or transporting ma-
chinery.
- Technician.
A technician is considered a person
who has the experience, technical education, legis-
lative and regulatory knowledge that allows him to
carry out any type of required work, and the ability to
recognise and to avoid possible risks during machine
installation, and maintenance.
☞
- INDICATION SYMBOL
Particularly important
information to avoid machine malfunctions.
•
- ATTENTION SYMBOL
Very important informa-
tion to avoid serious damage to the machine and to
the environment in which it operates.
•
- DANGER SYMBOL
Vital information to avoid se-
rious (or extreme) consequences affecting the health
of persons and causing damage to the product and
the environment in which it operates.
Total weight (ready to operate)
Max. working range incline 2%
(Max. transporting range incline 10%)
Rated power brush drive
Rated power suction turbine
1.3.
PRODUCT IDENTIFICATION
The nameplate located under the dashboard, above
the battery connector, contains the information.
1.4.
SPECIFIC USE
This appliance is suited for the commercial use, e.g. in
hotels, schools, hospitals, factories, shops, offices, and
rental companies.
This machine is a floor scrubber-drier: it must be
used to scrub and to vacuum liquids of flat, rigid,
horizontal, smooth or moderately rough and uniform
floors that are free from obstacles in both civic and
industrial environments. Any other use is prohibited.
Please refer very carefully to the safety information
reported in this manual.
The scrubber-drier distributes a quantity of a water
and detergent solution (adjustable) on the surface
to be cleaned, while the brushes remove any dirt on
the ground. The machine’s suction system, using a
ground squeegee, perfectly dries the liquids and the
dirt just removed from the front brushes in a single
pass.
By efficiently combining a cleaning detergent with
various types of brushes (or abrasive disks), the
machine can adapt to all the various combinations
of floors and dirt.
1.5.
TECHNICAL MODIFICATIONS
The manufacturer reserves the right to make technical
modifications to the product, without prior notice, in
order to make the necessary technical upgrades or
improvements. For this reason, some details of your
Summary of Contents for DART
