LAVOR Pro INDIAN, Manual

Page: 27 / 80

27
EN
Repair • Check the level in the tank
and check whether the
rigid suction pipe is clean.
• Replace the line filter.
• Replace it.
• Replace it.
• Contact an authorised
service centre.
• Check the positioning.
• Replace it.
Fault Water is not hot enough
Cause • Poor boiler performance.
• Boiler coil clogged with
limestone.
Repair • Clean burner nozzle filter.
• Clean fuel filter.
• Check diesel pump pres-
sure.
• Descaling.
Fault Too much smoke from the
chimney
Cause
• Combustion is not cor-
rect.
• Impurities or water in the
fuel.
Repair
• Clean fuel filter.
• Clean the boiler.
• Empty the tank and clean
it carefully.
• Clean fuel filter as well.
Fault Insufficient detergent suc -
tion
Cause
• No detergent in the tank.
• Incrusted injector.
• Either coil or tube or lance
are clogged.
Repair • Fill the detergent tank.
• Clean it.
• Either cleaning or descal-
ing.
> REPAIRS - SPARE PARTS
For any problems not mentioned in this manu-
al, or if the machine breaks down, you are urged
to contact an
Authorized After-Sales Service
for the relative repair or for any replacement of
components with original spare parts. Use ex-
clusively original replacement parts.
> BOILER CLEANING
•
ATTENTION: For all maintenance of the
boiler, of the high pressure pump and of
the machine, it is necessary to address
to qualified personnel or to an author -
ized assistance center .
The boiler cleaning must be periodically ex-
ecuted every 180 ÷ 200 hours of working.
> WARRANTY CONDITIONS
All our machines are subjected to strict tests
and are covered against manufacturing de-
fects in accordance with applicable regulations
(minimum 12 months). The warranty is effective
from the date of purchase. If your high pressure
washer or accessories are handed in for repair, a
copy of the receipt must be enclosed.
Guarantee repairs are being made on the
following conditions:
- That defects are attrib-
utable to flaws or defects in materials or work-
manship. - That the directions of this instruction
manual have been thoroughly observed. - That
repair has not been carried out or attempted by
other than authorized service staff. - That only
original accessories have been applied. - That
the product has not been exposed to abuse
such as knocks, bumps or frost. - That only wa-
ter without any impurities has been used. - That
the high pressure washer has not been used for
rental nor used commercially in any other way.