Lavo LE90011A, User Manual

Page: 50 / 52

Uncover the back
piece battery box
press “Menu” button
for 6 seconds
22. Notices for Use
Initialization setting
Initiation indicates deletion of all fingerprints and ciphers, and the initial admin cipher is “1, 2, 3, 4”.
In registering or reading the fingerprint, operation may fail or picture quality of
collected fingerprint is poor due to improper putting finger on the fingerprint
collector. Try to put your finger at the center of the fingerprint collector.
The fingerprint is collected in optical manner; please operate carefully to prevent the
collector from damage or dirt.
In registering fingerprint, just put finger on the fingerprint collector for about 0.5
seconds. Staying there long may impair the effect of collection.
LAVO electronic locks are the exquisite and complicated hi-tech products.
Users are prohibited to detach or assemble the product arbitrarily which may cause product failures or
other risks.
Users shall clean the product with a piece of dry cloth or dry towel rather than with water.
When you need to reinstall the product to other places, please contact us (installation cost charged).
If the door can’t be opened from the outside in normal way (except weak current), please try the
opening with the emergency key.
Battery’s service life Chargeable batteries can’t be used
Service life 6 ~ 12 months (varies with battery performances)
Notice to replace the batteries
In normal opening, if voice prompts: “Low battery electric quantity” upon
inputting cipher or fingerprint”, please replace the batteries in time.
Method to use the emergency dry batteries
When the indoor dry batteries are dead, uncover the acrylic panel at the
low part of the outdoor piece and show the emergency power port therein,
then open the door with 9V batteries.
Don’t try to detach or assemble the product arbitrarily, or clean it with water.
Methods against battery death
LAVO Smart Lock
Uncover the back piece battery box and press Menu button for 6
seconds the screen shows “Resume factory ALL DATE LOS # ok
*CANCEL Rest Confirm”,“*”button confirmation.“#”button
confirmation.Press“#”button to resume the factory default.