Lavit Document: TM170915---A
15
TM170915-B
9.
IN ANY KNOWN AREA WITH HIGH SEDIMENT WATER, A PRE---SEDIMENT FILTER
SHOULD BE INSTALLED BEFORE THE DISPENSER.
10.
Ensure that the Power Switch is in the OFF position (bottom in). Connect the power cord.
11.
Locate the CO
2
inlet pressure line inside the side compartment. Extend the line away from
the dispenser and trim the line using a tubing cutter so that the final length of the tube
extends to the inside of the door hinge.
12.
Connect the supplied CO
2
pressure regulator to the inlet tubing. Ensure that the regulator is
fully off by turning the knob fully counterclockwise.
13.
Wipe the bottle threads and screw the supplied 1.5-pound CO
2
cylinder onto the
regulator
.
DO NOT TURN THE GAS PRESSURE ON AT THIS POINT
. Place the cylinder
in the side compartment ensuring the
side door properly closes.
Summary of Contents for LB115 Series
