72
Click
【
Alarm
】
to enter the alarm setup menu. You can set up and operate the alarm functions, as
shown in Diagram 4-7 Alarm .
Choose the type of alarm in the menu; monitor video loss, motion detection, disk full, disk error,
video mask, and external alarms.
Click
【
Video Pop-up
】
open the video loss, motion detection, hard disk full, hard disk failure, video
block, video encoder, alarm pop-up.
Click on
【
Prompt
】
open the prompts. When an alarm occurs in real-time it pops up an alarm
window menu.
Click on the
【
Sound Pop-up
】
check box and you can choose an alarm tone that is pre-recorded on
the local hard drive and will play when an alarm occurs. The alarm tone files are in the WAV format.
DIAGRAM 4-7 ALARM CONFIGURATION
4.1.8. ABOUT
Please refer to the Web controls for relevant version information.
5. FUNCTIONS