80
Step size
：
Controls P/T/Z direction and speed, e.g. step size 8 is faster than step size 1. (Range
1-8, 8 is the maximum)
Click
and
for zoom, focus and iris modification.
There are eight directional controls: up, down, right, left, upper left, upper right, lower left, lower right.
(The front panel control only uses 4 directions).
Quick location: Use the <SIT> button in the middle of the directional arrows; make sure the protocol
supports this function and use only mouse control. Click any point and the P/T/Z camera will turn to
it and move it to the center of the screen.
Drag the mouse to find the location page, it supports 4 ~ 16 times variations, drag from top left to
bottom right to zoom in, drag from bottom right to top left for zoom out.
Advanced Functions
Click
―Page Switch‖ to switch to the advanced functions, as shown in Diagram 5-4 P/T/Z-Advanced
【
Preset
】
: Enter the desired previously configured Preset number in the number field then click the
Preset button to select it.
【
Tour
】
: Enter a Tour
number in the number field and click on the ―Tour‖ button to run it or stop a
tour using the
―Stop‖ button.
【
Pattern
】
: Enter a Pattern number and click on the
―Pattern‖ button to run it. The camera will follow
the set patrol path. Right click to hide the menu.
Click the directional key in menu to stop the patrol.
【
Auto Scan
】
: Click
―line‖ calls for the line scan function as per set line to scan, the button will turn
into
【
Stop
】
, if you want to stop the motion, click it.
DIAGRAM 5-4 P/T/Z-ADVANCED
